PDA

View Full Version : The Roman Colosseum



Adrian Hernandez
11-28-2011, 2:58 PM
Hi everyone,

I just finish putting together The Roman Colosseum; I designed it from scratch and it assemble perfect.

PS. I just want to share with you my achievement

:) :) :)

Regards
Adrian

Rich Greinert
11-28-2011, 3:01 PM
Very cool! What are the dimensions?

Dee Gallo
11-28-2011, 4:31 PM
Nice work, Adrian! You know, they make a spray paint that looks like stone... could be a nice finish for you.

cheers, dee

Ron Chapellaz
11-28-2011, 5:12 PM
That is an amazing project. Nice job done! I agree with Dee, paint it up so it looks like stone. How much wood did your project use? I'd be curious to know!

Khalid Nazim
11-28-2011, 5:35 PM
Fantastic. What is the size of this model?

Ed Maloney
11-28-2011, 6:05 PM
Whoa! This is really cool. What type and thickness of wood and how long did it take from start to finish?

Dan Hintz
11-28-2011, 6:43 PM
And if you're up for it, I'm sure many here wouldn't mind a copy of the CAD files :D

Larry Robinson
11-28-2011, 8:01 PM
Spectacular!

Thanks for the photo's.

Adrian Hernandez
11-28-2011, 9:08 PM
The size of the project is 22 X 19 X 6. I used 9 sheetsof 30 X 12 X 1/8 birch plywood. As far as time I think it took me about two hoursto cut the entire project. To put it together, about 4 hours with thehelp of my daughter without using any glue. As for the finish, I am looking fora paint or stain that can deliver a stone looking finish. By the way I am goingto take it apart to sand and finish it; after that I will use glue to put ittogether.
PS. Thanks for your comments.
Regards,
Adrian

Albert Nix
11-29-2011, 2:01 PM
Wow!! looks great Adrian. I bet the cad work to a while. But I need to know one thing..wheres the back door lol.

Mark Conde
11-29-2011, 3:24 PM
Great job. Very impressive. Looking forward to seeing it finished, too.

Mike Chance in Iowa
11-30-2011, 3:44 PM
Very nice Adrian. Could you give us a few more details? Did you design it all in Corel or a CAD program or some other program?

That's quite an impressive project. Thank you for sharing the photos. Will be looking forward to seeing your finished project!

Adrian Hernandez
11-30-2011, 4:39 PM
Hi Mike,

I design it with AutoCAD the size of the project is 22" X 19" x 6" and I used 1/8" birch plywood

George M. Perzel
11-30-2011, 5:56 PM
Hi Adrian;
Saw the original in Rome-yours looks much better!! Great job!!
Best Regards,
George
Laserarts

bryan henderson
12-05-2011, 1:15 PM
awesome layout, care to share with us on the CREEK with the "CDR FILE"?????

Bryan

Doug Novic
12-05-2011, 8:07 PM
Adrian,

Awesome!