View Full Version : Anyone know where I can get a 3/8 ID collet?
Jack Gaskins
11-22-2011, 5:46 PM
I am making some turning tools and need a collet or reducer to stick in my handle so i can swap out different 3/8 size bars. This is a small tool so my handle is only going to be about 8 inches or less. I looked at Enco but can seem to locate what I am looking for.
Jack
Jim Burr
11-22-2011, 5:50 PM
CSUSA has collets...not sure of the size.
Thom Sturgill
11-22-2011, 6:08 PM
Is this what you want?
213528
Hosaluk insert available at CSUSA
Paul Heely
11-22-2011, 6:10 PM
I bought mine from Little Machine Shop, www.littlemachineshop.com. Here's a pic of what I think you are asking about.
213529
Jack Gaskins
11-22-2011, 7:13 PM
Is this what you want?
213528
Hosaluk insert available at CSUSA
Thanks Thom, That is exactly what I am looking for.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.