View Full Version : Inexpensive place to get clock parts

Kasey Maxwell
11-16-2011, 10:03 PM
Hi all, I want to make my own clocks using the laser engraver, I need a good source to get battery operated clocks, I looked at Michaels but they want like $10.00 each, I'd like to find a cheaper source......

Thank you

Randy Digby
11-16-2011, 10:33 PM

Joe Pelonio
11-17-2011, 7:54 AM
Google Klockit

I get them by the dozen at under $3 each and you can choose the hands.

Martin Boekers
11-17-2011, 8:29 AM
Sometimes I buy the whole clock as I find it cheaper than
just buying the parts. How crazy is that?

Klock-It isn't exacty cheap, but they have a variety of clocks and parts.

Gary Gardner
11-17-2011, 9:09 AM
If you go in the back door of klockit you will find the wholesale division and that is called Primex. The prices are much better. The web site is www.primexusa.com (http://www.primexusa.com)


Ruben Salcedo
11-17-2011, 10:42 AM
Here is another one http://www.clockparts.com/


Kasey Maxwell
11-17-2011, 9:17 PM
very nice, all this will help very much, thank you all !

Mike vonBuelow
11-17-2011, 10:19 PM
another place that I've been happy with is woodworkingparts . com

Joe Hillmann
11-18-2011, 9:58 AM
As long as someone brought up the subject of clocks, does anyone know where to get powerful clocks. I have an idea for a clock that is two rings that rotate around each other with no hands but every clock movement I have tried hasn't had the power to turn it for more than 5 minutes.

George D Gabert
11-18-2011, 2:50 PM
You might want to look at http://www.nationalartcraft.com/categoryA.asp?gid=2&cid=3 for reasonable cost and also for heavy duty movements.


George D Gabert
11-18-2011, 3:35 PM
For clock inserts you might try this http://www.nationalartcraft.com/categoryB.asp?gid=2&cid=43


john passek
11-20-2011, 6:31 PM
www.klockit.com (http://www.klockit.com) out of lake Geneva. WI