Wine Bottles

[Kathy Moore]

Good Morning all
I know this is probably a simple thing but try as I may I am not figuring it out
I want to engrave on a wine bottle with the text horizontal to the bottle. Mine keep turning out vertical to the bottle. HELP!!
I am a visual person so if someone could send me a picture that would be wonderful.

Thank you
Kathy

[Dee Gallo]

Kathy,

The file must be sideways on your screen in order to print correctly, if that is what the problem is.

In other words, the horizontal measurement of your file should be the same as the bottle height. The vertical measurement should be the diameter of the bottle x 3.14 (pi) if you are going all the way around.

I usually place the image close to the top looking at the screen, so that you know exactly where it is going to start engraving. This is actually more important when there is a handle on a mug, but it's good practice in my opinion.

Hope this helps, dee

[Kathy Moore]

Thank You Dee
You are the best.
This makes perfect sense.
Kathy