Wally Dickerman
11-03-2011, 2:13 PM
Check out the deep turnings of Anatoly Tsiris.
I'm interested in the fact that the lathe he's using is a John Nichols Custom lathe. I turned for several years on a Nichols bowl lathe. He made it for me with a left handed spindle thread. (I'm a lefty) It had a swing of 26 inches, but not nearly as long a bed as this one has. I turned some big stuff on it but not even close to what we're seeing here. I seldom go bigger than 12 inches any more even though my Oneway will swing 24 inches.
http://www.anatolytsiris.com/?page_id=2
I'm interested in the fact that the lathe he's using is a John Nichols Custom lathe. I turned for several years on a Nichols bowl lathe. He made it for me with a left handed spindle thread. (I'm a lefty) It had a swing of 26 inches, but not nearly as long a bed as this one has. I turned some big stuff on it but not even close to what we're seeing here. I seldom go bigger than 12 inches any more even though my Oneway will swing 24 inches.
http://www.anatolytsiris.com/?page_id=2