Bob Smalser
03-03-2005, 9:04 AM
Previous – The Board:
http://www.sawmillcreek.org/showthread.php?t=16747
CVG 3/8” Doug Fir is laid up into panels with rabbeted 7/8” bed logs:
http://pic3.picturetrail.com/VOL12/1104763/6791366/87638212.jpg
http://pic3.picturetrail.com/VOL12/1104763/6791366/85464400.jpg
Posts are thicknessed and primed and case profile laid out for one side:
http://pic3.picturetrail.com/VOL12/1104763/6791366/85463554.jpg
Opposite side laid out…
http://pic3.picturetrail.com/VOL12/1104763/6791366/87637955.jpg
….and made identical. Sides were also drifted using ¼” bronze rods as in Part I:
http://pic3.picturetrail.com/VOL12/1104763/6791366/85653808.jpg
Interior painted and assembly clamped up using nonadhesive sealant…
http://pic3.picturetrail.com/VOL12/1104763/6791366/87637954.jpg
Continued…
http://www.sawmillcreek.org/showthread.php?t=16747
CVG 3/8” Doug Fir is laid up into panels with rabbeted 7/8” bed logs:
http://pic3.picturetrail.com/VOL12/1104763/6791366/87638212.jpg
http://pic3.picturetrail.com/VOL12/1104763/6791366/85464400.jpg
Posts are thicknessed and primed and case profile laid out for one side:
http://pic3.picturetrail.com/VOL12/1104763/6791366/85463554.jpg
Opposite side laid out…
http://pic3.picturetrail.com/VOL12/1104763/6791366/87637955.jpg
….and made identical. Sides were also drifted using ¼” bronze rods as in Part I:
http://pic3.picturetrail.com/VOL12/1104763/6791366/85653808.jpg
Interior painted and assembly clamped up using nonadhesive sealant…
http://pic3.picturetrail.com/VOL12/1104763/6791366/87637954.jpg
Continued…