New Member Here.......

[Corey Hallagan]

Hello all. New member freshly signed up. Been wood working for about 15 years on and off. Recently jumped back into making saw dust. Celebrated my return with a new table saw purchase, I picked up the Delta 36=375 special at Home Depot for $399.00 Not yet assembled as the shop is full of remodelling supplies.
I like to build clocks and small furniture. My shop has a 15 1/2 drill press, Delta Table Saw, several craftsman routers and router table, Dewalt sanders, Craftsman cordeless Drill/Driver - Ryobi Compound mitre Saw, Delta 16 inch Scroll saw. I am kind of a router nut. Will probably move out 2 of my cheap craftsman routers and buy a Dewalt 618 as my next purchase. Would also like to build "Norms" router table. Will soon be remodelling the kitchen and removing the cabinets which will all become part of my shop. Can't wait! Anyway, just a hello from a new member!
Corey

[Jim Dunn]

Let me the 1st to welcome you. Have fun and "first lets talk about shop saftey";)

[Robby Phelps]

Welcome Corey. I am pretty new here myself. Great bunch of folks here. Always helpful and friendly. Never feel shy to ask any questions and to give feed back. All are welcome. Thats probably why this is now my favorite forum. (there are also quite a few funny guys here, always good for a laugh)

again welcome and glad to have ya

[Stephen Dixon]

Now, you're really up the Creek, join the rest of us, tell us where your from and don't be surprised if someone demands pictures.

Steve

[Herb Blair]

Welcome to the Creek. I also build clocks. Just starting one this week.
be sure to show us pictures of your projects.... we like pictures!

[Alan Turner]

Welcome aboard.

[Karl Laustrup]

Welcome, Corey. Lots of good people here and a lot of knowledge resides here in the "Creek".

As has been stated, we like pics of projects, new tools, etc. ;) :D

[Bryan Nuss]

Welcome to the Creek Corey. I'm sure you'll have a great time here.

We had a discussion on Norm's router table design a while ago. Try this link:

http://www.sawmillcreek.org/showthread.php?p=117677#post117677

Good to have you aboard.

[Frank Pellow]

Welcome to Saw Mill Creek Corey. I discovered this site just about a year ago now and I can tell you that discvering it was one of the highlghts of 2004 for me. I hope that the same is true for you in 2005.

[Ken Fitzgerald]

Welcome to the 'Creek Corey! Wade right in ....the water's fine!

[Steve Ash]

Welcome! I'm kinda new here myself, but I have found out there is a wealth of information to be learned here from these guys and gals.....Enjoy!

[Lamar Horton]

Glad to meet you Corey, as has been said, a wealth of information and wholesome place to hang out. By the way, were are you from?

[Corey Hallagan]

Thanks for the great welcome guys. I hail from Council Bluffs, Iowa, accross the muddy missouri from Omaha, Ne. Looking forward to being a part of this site.
Thanks again!
Corey

[Jim Becker]

Welcome, Corey! 'Nice place to put your feet up after a hard day chasing sawdust (or making a living)... ;)

[Mark Singer]

Corey,

Welcome to the Creek....you will like it here...we have only nice people and the food is excellent!

[Byron Trantham]

Welcome Corey. You'll like it here; everyone is so helpful. :D

[Mark J Bachler]

Wade right in & have some fun. There's allot of tallent & wisdom waiting to be shared here. Shop, project & new tool pictures are required, sooner or later.

Speaking of that, where's Tyler been?

[Bob Hovde]

Thanks for the great welcome guys. I hail from Council Bluffs, Iowa, accross the muddy missouri from Omaha, Ne. Looking forward to being a part of this site.
Thanks again!
Corey

Corey,

If you click on User CP on the top bar and then on Edit Profile, you can put Council Bluffs in the Location block and it will show up in your posts.

Bob

[Lou Morrissette]

Corey,

Welcome to the Creek. Great place to hang out and learn from some very friendly folks.

Lou

[Corey Hallagan]

Corey,

If you click on User CP on the top bar and then on Edit Profile, you can put Council Bluffs in the Location block and it will show up in your posts.

Bob
Thanks Bob, I put that in!

Corey

[Jim Stastny]

Welcome to the Creek. We look forward to hearing from you and seeing pictures of your work.

[lou sansone]

welcome to the creek .... time to clean up the shop and get busy...no more excuses

lou

[Corey Hallagan]

No kidding. I just ordered a new dial indicator and base and a Dewalt Series 40 combo blade and ready to rock!

Corey

[Jeff Sudmeier]

Corey,

Welcome to the Creek. As you can see you have joined a great forum! Be sure to post pics of your next project :)

[John Renzetti]

Hello Corey, Glad to have you with us. Great place and people.
take care,
John

[Jerry Olexa]

Welcome aboard!!

[Charlie Woods]

Welcome Corey!!I think you will find SMC to be positive, helpful and a fun place to ask questions, share information and learn.:)

[Ken Salisbury]

http://www.oldrebelworkshop.com/welcomeplane.gif

http://www.oldrebelworkshop.com/misc/moderator.gif