Wanted: Outfeed Table for '59 Unisaw

[Tom Legate]

Missed an outfeed table for my Unisaw in the "Classifieds". Any others out there for sale?

[Jamie Buxton]

Hasn't the Unisaw been basically the same since the dawn of time? At any rate, I have an outfeed table from HTC hung off the back of my mid-seventies Unisaw. It works well. HTC calls it "universal", so it should be able to fit your Unisaw even if it is different from mine. http://www.htcproductsinc.com/outrs.html

[Jim Becker]

Umm....great project to build, rather than buy... ;)

[Mike Wilkins]

Jim put it nicely. There are commercially available tables for sale. But by building your own, you can get exactly what you want. Limited space? No problem. I built a fold-down table for my Uni, which got sold with the Uni when I got a slider. Or you can make a more permanent one by building a cabinet with miter slots in the top, put a vise on the far end, doors/drawers underneath. There are examples in many books from Taunton and others. Check the local bookseller for woodworking books.