View Full Version : Scroll saw project *pic*
Terry Quiram
02-16-2003, 7:51 PM
This is one of my newest projects. It is book matched Maple crotch on very black stained Walnut.
Terry
Bob Lasley
02-16-2003, 8:51 PM
Terry,
Looks good! How thick is the maple?
Bob
Bill Murphy
02-16-2003, 11:10 PM
Nice work Terry.
Terry Quiram
02-17-2003, 6:56 AM
Originally posted by Bob Lasley
Terry,
Looks good! How thick is the maple?
Bob
Morning Bob
Almost everything I scroll is 1/4 inch. I cut 3 at a time. That way I have 2 to sell and 1 to keep. The other 2 were Mahogany.
Terry
Ron Smith ... Richmond, VA
02-17-2003, 11:16 AM
Do you make your own patterns?
Terry Quiram
02-17-2003, 6:00 PM
Originally posted by Ron Smith ... Richmond, VA
Do you make your own patterns?
Hi Ron
I have made a few of my own patterns. Mostly enhanced from a picture I found. I even had one published in Woodworkers Journal in 1996. If I had enough talent to draw patterns I would not be covering myself with sawdust.
Terry
Rik Rickerson
02-17-2003, 10:11 PM
Terry
Very Nice Job! I've found scroll work to be very relaxing but never really cared for the majority of the projects. What you've done with the contrast of wood is really stunning!
Rik
Howard Barlow
02-17-2003, 11:17 PM
to cut out one like that? I bought a DeWalt scroller but sold it shortly thereafter. I don't have the patience for such. I wish I did, though, I've seen some nice work.
Terry Quiram
02-18-2003, 7:00 AM
Originally posted by Howard Barlow
to cut out one like that? I bought a DeWalt scroller but sold it shortly thereafter. I don't have the patience for such. I wish I did, though, I've seen some nice work.
Howard
I know scrolling is not for everyone. My wife tried and found it to be too tedious. That piece took approx 4 hours to cut. I took my time and paid close attention to making nice sharp corners. That always takes extra time.
Terry
Jason Roehl
02-18-2003, 7:02 AM
And here I thought that you and Ray were just piddlin' with the one in Ray's shop--it wasn't until later that I found out it wasn't working right.
Hopefully see you again on 4/12!
Jason
Howard Rosenberg
02-18-2003, 10:05 PM
nm
Keith Outten
02-19-2003, 12:46 AM
What are the specs on your scroll saw?
My experience after buying three saws is that you get what you pay for and the high quality saws make the job more enjoyable. Wish I had a Hegner!
I guess you have heard of Wildwood Designs (http://www.wildwooddesigns.com)
RJ Schuff
02-19-2003, 4:58 PM
Nice work Terry,
What is your favorite type of blade for this scrolling?
RJ
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.