PDA

View Full Version : Chromolux Mirror



Ian Franks
09-28-2011, 4:45 AM
Has anyone cut chromlux mirror board 250 GSM?
We have tried cutting from the back side but it burns. The sheet we tested on had a curl so it was hard to get it flat.
What we are scared of when cutting from the front is the laser reflecting back and damaging something?

So thought we try and see what experiences you guys have had.

Dan Hintz
09-28-2011, 6:29 AM
Are you talking about the cardboard stuff with a (semi-)mirrored finish? If so, you have nothing to worry about... the laser will slice straight through it from the front.

Ian Franks
09-28-2011, 3:21 PM
Thanks Dan we will try it out from the front.

Dan Hintz
09-28-2011, 8:08 PM
If you're ever worried about something like that, place a piece of tissue paper over it (use a few dabs of glue stick here and there to hold it down, if need be).