glenn bradley
09-24-2011, 2:26 PM
I have a project coming up that will involve some sheetgoods work. Tie to update my trusty old shop made GCS.
208345
I used ripped pieces of 3/4" MDF and 1/4" hardboard. Your measurements will vary with your saw and your hardware but, these pics should tell the story. The holddowns can slide to any size within the capacity of the jig. Mine is 54" to cross cut ply or MDF or anything smaller.
208346208347208348208349208350208351
208345
I used ripped pieces of 3/4" MDF and 1/4" hardboard. Your measurements will vary with your saw and your hardware but, these pics should tell the story. The holddowns can slide to any size within the capacity of the jig. Mine is 54" to cross cut ply or MDF or anything smaller.
208346208347208348208349208350208351