Is Cermark UV stable?

[Steve Clarkson]

I seem to recall reading that Cermark is not UV stable......I tried searching the old posts, but since you can't input a two letter word, nothing relevant came up.

I'm planning to use Cermark on stainless steel and was wondering if it was appropriate for an exterior application.......will it fade?

Thanks

[Dan Hintz]

It should be fine... you can heat the stuff with a blow torch cherry red and it bounces right back.

[Bruce Volden]

I made a sign back in 1997 on a sheet of SS about 9" X 13" in size. Back then it was Cerdec. It has been hanging on the door of a local powdercoating shop ever since! Everything looks as it did when I took it out of the laser as far as the marking goes, the SS has a nice faint brownish/yellow hue to it 'tho. So, yeah, UV NOT a problem.

Bruce

[Steve Clarkson]

Thanks guys