dispol-a-blade (grizzly)

[craig carlson]

Hi,

Anyone out there used this (most expensive) option? Usally I sharpen my own blades or send them out. So I thought I'd tried these puppies out but they don't even come close to fitting right. So, either I'm doing something wrong or Grizz sent me the wrong parts, these parts are about .300 of an inch short in the recess for the knives.

Craig

[Richard Ferment]

I have them. I hate them. One is higher than the other three. No adjustabilty. I still use them but without the magnets. I put the springs back in and adjust the old fassion way. :( IMHO they are NOT worth the price.

[craig carlson]

Hi Rich,

It kinda came together tonight but I had to refer to the dispoz-a-blade web site to get things right. I'm not sure it saved me any time, but at least I'm back on line. Good idea on the spring/magnet setup. I wonder how the latest
spiro cutter heads will pan out over the years.

Craig