PDA

View Full Version : Fabrication and Shop Techniques Interesting video re: making steel framed custom bicycles



Eric DeSilva
09-12-2011, 7:00 PM
I ran across this again, and since I enjoyed it, I thought other folks here might appreciate it too. If you like metal working, its an interesting view in a small scale fabrication shop. If you like bikes, its an interesting view into how they are constructed. If you like both, its an awesome video.

http://www.vimeo.com/18969652

Ted Calver
09-12-2011, 7:39 PM
Eric,
Thanks for posting. I'm not even a metal guy and that video was great!!! Love to have one of those bikes.

Terry Beadle
09-13-2011, 12:32 PM
+ 1 Thanks for posting. Really interesting to watch that guy work and what a bike !

Bruce Boone
09-13-2011, 7:34 PM
Very cool. I worked at GT Bikes for a time, so got to see bike making up close and personal. I programmed a laser that would cut the bike tubes. I used to make Human Powered Vehicles (bikes with aerodynamic farings) also which had frames of every strange configuration. I've been into bikes for a very long time. Good stuff.