PDA

View Full Version : First Hollow Form



Dahl Troy Perry
09-05-2011, 5:41 PM
Well here is the first try at a hollow form /segmented vase just a lot of scrap glued up. 3/16 wall thickness learned a lot how to remount after throwing it off the lathe. Started from top and bottom and glued in the middle then turned outside . Made a crude steady rest to take lite cut on id to clean up and sanded to 400 and buffed. Made from walnut and maple. I see now I need a good steady rest have to talk to Jeff and see if he can make me one for my little delta:)

Nate Davey
09-05-2011, 5:51 PM
Nice job, I like the shape and random pattern of your segmenting