Kevin L Little
09-05-2011, 4:41 PM
I've been looking for a kit that would allow either a magnetic cap or snap top as a customer is not wanting one with the postable cap on threads. So I had a couple Artisan's in inventory and decided to try this kit. It was a fun kit to put together, but definately not my favorite.
The cocobolo has been sanded to 400 grit, wiped with DNA, 2 applications of cellulose sanding sealer, 2 coats of thin CA, 4 coats of medium CA/BLO then Novus 2 applied. I wanted a satin finish so it didn't compete with the gold.
I like the finish and may do more of this on future pens.
Thanks in advance for looking and comments. The vortex has a hold of my wallet and is pulling me in fast! But having a blast doing this!
:D
http://www.penturners.org/forum/attachment.php?attachmentid=59190&d=1315255092
http://www.penturners.org/forum/attachment.php?attachmentid=59189&d=1315255092
The cocobolo has been sanded to 400 grit, wiped with DNA, 2 applications of cellulose sanding sealer, 2 coats of thin CA, 4 coats of medium CA/BLO then Novus 2 applied. I wanted a satin finish so it didn't compete with the gold.
I like the finish and may do more of this on future pens.
Thanks in advance for looking and comments. The vortex has a hold of my wallet and is pulling me in fast! But having a blast doing this!
:D
http://www.penturners.org/forum/attachment.php?attachmentid=59190&d=1315255092
http://www.penturners.org/forum/attachment.php?attachmentid=59189&d=1315255092