David DiOrio
08-24-2011, 1:13 PM
Hi all, I just started using Pentacryl to experiment with some green wood to stabilize and reduce cracking. I have found that a
good 24 hour soak does the trick, I turned 4 bowls, Cherry about 1/4 to 1/8 wall thickness. I had the bowls air dry for weeks.
I tried sanding and instead of a dust I am getting a powder that is caking up on the sanding disks.
Does anyone have any experience with this or is there a solution other than not using the product?
good 24 hour soak does the trick, I turned 4 bowls, Cherry about 1/4 to 1/8 wall thickness. I had the bowls air dry for weeks.
I tried sanding and instead of a dust I am getting a powder that is caking up on the sanding disks.
Does anyone have any experience with this or is there a solution other than not using the product?