Small Ring Pulls

[Bryan Morgan]

So I've pretty much got the machinists chest built (building the one from Woodsmith #183) and finished. I found all the hardware I needed at Rockler except the ring pulls. I bought some small cup pulls from ebay but I don't think they are going to work right. I saw the ones on machinistchest.com but theres no way I'm paying 9 bucks a piece for 9 of them. The brass cups I got on ebay were $1.50 for a six pack. Anyone know where I can get something similar for a reasonable price? I don't mind paying a buck or two but not 9 bucks for a tiny piece of brass.

[Tony Joyce]

A quick Google search turned up this. http://tinyurl.com/3obyauu
(http://tinyurl.com/3obyauu)or this (http://tinyurl.com/3obyauu) http://tinyurl.com/3ovsrq2

[Bryan Morgan]

Thanks for the reply. I've found those same ones but they are a bit too big. The small drawer faces are only 1.25" so I need something less than 1" in diameter.

[Brian Loucks]

How about Horton Brass?

[Bryan Morgan]

How about Horton Brass?

Didn't know about them, thanks! Looks like the smallest they have is a little over 1"