Atlas 9360 10" Band Saw

[Greg Webb]

Hi,
I went early to a Garage/Estate sale the other morning and although there was not alot to write home about I found this jewel in the mess and bought it for $25! These are pics of it after a very short clean up and it runs very nice the tires are cracked and rotten and will have to be replaced. If any one has any info on this saw or the best route to replace the tires I would be happy to hear about it! Thanks!

[Paul Symchych]

Do a search. there are a number of hits. This is from one:





Throat: 10"
Max depth of cut: 5.5"
Table size: 10" x 10", tilts up to 45° right
Blade sizes: 1/8"-3/8"
Blade guides: 4 Oilite bronze on the sides, 2 hardened steel back-up rollers
Wheel bearings: bronze
V-Belt pulleys: machine-5.0", motor-2.5"
1954 list price: $49.15

[Rick Potter]

Suggestion on the tires. To temporarily tide you over until you get new ones, wrap FRICTION tape around the wheels and current tires. It will hold the old tires together till the new ones arrive. I did that years ago, and it worked for quite a while. Be sure to wrap in the right direction.

My first table saw was an Atlas 8" that was really old when I got it in 1967 or so. Worked fine for about 10 years till I bought a new Unisaw.

Rick Potter

[Greg Webb]

Thanks Gentlemen,
Still hoping to hear more about this saw!