View Full Version : How Do I Sharpen My New P&N Detail Gouge
Daner Steel
07-24-2011, 1:18 PM
Hello all,
I just reciveid my new P&N detail gouge from LV.
I do have the oneway vari grind
Out of the box, It looks like a small roughing gouge
http://www.leevalley.com/en/wood/page.aspx?cat=1,330&p=49138
How Do I put the first edge on this 1/2" tool?
Tia.......Daner
Tim Thiebaut
07-24-2011, 1:47 PM
Howdy, from the photo you posted I really cant make out the shape of the tool...eyes arent as young as they used to be, but what helped me when I was learning to sharpen in the beginning is a PDF that Doug Thompson has on his website on the proper settings for the vari-grind....check this link out and see if this will help you, it worked wonders for me!
http://www.thompsonlathetools.com/sharpening.asp
Daner Steel
07-24-2011, 2:00 PM
Here's some pics of the detail gouge
Tim Thiebaut
07-24-2011, 2:30 PM
Here's some pics of the detail gouge
Yea, I would try the instructions in the PDF at the link I posted above...once I read them it finaly clicked for me and made a big difference.
John Keeton
07-24-2011, 2:34 PM
There are unlimited profiles for this gouge depending on your intended use. From the top, this is what mine looks like, and I have a double bevel on the heel, leaving a working bevel of less than 1/8".
Daner Steel
07-24-2011, 3:50 PM
thanks guys....John I think I will try to copy your grind,,,,,,Thanks all
Daner
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.