Jeff Belany
07-20-2011, 11:38 AM
Did my first ceramic tile with Cermark LMM12. Came out pretty well, nice, fairly dark mark, dark gray to black. My question is this -- the mark is quite rough (like sandpaper) especially compared to the glazed tile. Is this normal? Am I over/under powering it? I'm using close to the recommended setting, running a little faster but with 2x the power as speed. How has this worked for you guys out there? Overall I'm pretty pleased.
I see the new Cermark for tile (LMC-6044) doesn't rub off like the LMM12 does. How is your experience with the new formula?
I'm real curious how many 4x4 tiles I can spray with 1 can to determine the cost/tile. Next time I'll get the compound and spray my own.
I had to go this way when Home Depot decided to discontinue 4x4 Marble tiles iin the 2 colors I've been using a lot of, white and brown. The white I can use ceramic but not sure if I can find a nice brown since the dark brown Marble lasered white.
Hope the customer likes the ceramic.
Jeff in northern Wisconsin
I see the new Cermark for tile (LMC-6044) doesn't rub off like the LMM12 does. How is your experience with the new formula?
I'm real curious how many 4x4 tiles I can spray with 1 can to determine the cost/tile. Next time I'll get the compound and spray my own.
I had to go this way when Home Depot decided to discontinue 4x4 Marble tiles iin the 2 colors I've been using a lot of, white and brown. The white I can use ceramic but not sure if I can find a nice brown since the dark brown Marble lasered white.
Hope the customer likes the ceramic.
Jeff in northern Wisconsin