Need Help With Rough-Turning HF with Green Wood

[mike ash]

I've been practicing making HF's from seasoned wood with my Monster, but now it's time to get serious with some beautiful "fresh-cut" Madrone. I could use some help procedurally, going from green wood to final product.

Thanks ahead of time.

Mike Ash

[David E Keller]

If you're going for wrinkles(I hope you are!), not too much changes from seasoned wood. You definitely need to do the entire piece in one session. I've never had a chance to work with madrone, but I hear it moves quickly. I've often though I might use plastic wrap around the outside of the form to prevent moisture loss while hollowing... Not sure if that would keep it from moving or not. I hope you'll share the finished product!