PDA

View Full Version : WINNERS! 1/8" (3mm) Russian Birch Ply & 1/8" Premium MDF sheets in various colors



Glenn Clabo
07-14-2011, 8:52 AM
201801
1/8" (3mm) Russian Birch Ply & 1/8" Premium MDF sheets in various colors
The first winner is Anthony Welch
The second winner is John Richards


The Winners will be draw on July 30th


After a long search, Michael Kowalczyk has found a new supplier to add laser-able sheet goods, for the laser or scroll saw, to his product line. He is offering something a little different, again, this year. He has donated 2 boxes (so we can have 2 winners) one of his standard Genuine 3mm B/BB Russian Birch that is cut to approximately 11 3/4" x 11 3/4"+- and one of the New 1/8” Premium MDF with either a Hard Rock Maple, Black, White, Grey or Almond on one side and plain on the other. (See pictures for colors)




The Premium 1/8” MDF panels have the paper thermally applied to Ranger MDF at a State of the Art facility, located here in Texas. This MDF has a very tight tolerance throughout the sheet. The list is endless as to what you can do with this product. It engraves nice and any residue wipes off with a damp towel.





We will be offering it in a variety of sizes to fit many larger tables and templates that are out there such as :12x24, 16x24, 18x24, 16x32 and a colossal 24x36. This FREE STUFF DRAWING offering will contain 16- 12”x24” assorted pieces, a few of each color, as a variety starter pack.




The Genuine 3mm B/BB Russian Birch are surplus corners that we have accumulated. The normal size is 11 3/4" x23 3/4"+- and each box will contain 25 of these sheets that are ready to load in your laser and start cutting your Laser Buzz wall tributes, ornaments, puzzles, key chains, picture frames, bookmarks or many other laser projects.






Shipping is included to the lower 48 in USA.

****1st winner to respond with ship to info gets choice of which one they get.****






Only Contributors are eligible to win and must opt in to be entered.




When you opt in, please indicate which one you would like or either.



Here is a portion of his info sheet to understand the value of this package.
“You do not have to drive to a lumber yard and try to get a 5' x 5' sheet in your vehicle, if you can find someone who sells this material close to you. Even if you can find it, the chances of this home center or lumber yard cutting it to get maximum yield would take a skilled person with the right equipment and sharp blade some additional time. This alone can save you an hour or two. Then if you find it, consider the time it takes to calculate the correct order of cutting to obtain the best yield and then cut it. You must also have a special saw blade, that is if you have a table saw. One blade is an 80+ tooth ATB which costs about $100.00+-, for a good quality blade, if you want to have minimal blowout on the sheet on a cross grain cut.
I mention this so that you can see what is involved to get your blanks. Some people are set up to do this and we offer it to those who may not have the means to do it themselves or just want it done for them so they can have quality material at a fixed price.”



Plan ahead so you have some inventory and you can save some money on shipping.


If you can't wait to see if you have won this offering, please send Michael a PM or an email to get more info or place an order."
Send Michael a Private Message (http://www.sawmillcreek.org/member.php?u=7880)


The Holidays are right around the corner (well there is always one around the corner) so don't be left out in the cold or stuck in the heat without product to sell or at the least something to give away to your family, friends, clients and strangers. Yes...Strangers! When you walk along the road, at a restaurant, a football game, on a plane, at a seminar or any one of a thousand places you frequent, give something you made away to someone you do not know.


Random acts of kindness some how finds a hole in the floor to hide when money gets tight but can bring priceless joy to those that give out of the kindness of their hearts without expecting anything in return and who knows you may even get a new customer that you may have never reached before.

Jerome Hanby
07-14-2011, 8:57 AM
Opt-in please, either

Cathy Wilson-Daly
07-14-2011, 9:08 AM
Please enter me for the 1/8" (3mm) Russian Birch

Jeff Belany
07-14-2011, 12:58 PM
Add me to the list. Thanks

mickey cassiba
07-14-2011, 1:23 PM
I'd like a shot at this...I need som scroll saw stock. Please count me in.
Thanks!

Jim Underwood
07-14-2011, 4:27 PM
Opt in for the Baltic birch ply please

Rudy Ress
07-14-2011, 5:48 PM
Count me in for the Birch please. Thanks.

Michael Dromey
07-14-2011, 5:56 PM
Opt me in also, Thanks

John Meyer
07-14-2011, 8:24 PM
Opt in for the Baltic birch ply please
John

Michael Kowalczyk
07-14-2011, 9:06 PM
Thanks every one for opting in and sharing your preference. Lets see if we can beat last years total entries of around 126.

Bob Merhar
07-14-2011, 10:40 PM
Opt-in please for either. Thank you.

Neil Longhenry
07-15-2011, 12:12 AM
Opt-in please for either. Thanks

Dennis Puskar
07-15-2011, 12:16 AM
Count me in for either. Thanks

Ralph Sprang
07-15-2011, 8:22 AM
Count me in, first choice would be the Russian birch, but either would be fine.

Randy Buck
07-15-2011, 8:38 AM
opt-in for either, please!

thanks!

Connie Gill
07-15-2011, 8:46 AM
Add me please.

Thanks!

John W Richards
07-15-2011, 9:03 AM
OPT in please, either will be fine with me.

Jim Tobias
07-15-2011, 9:20 AM
Please put me in.

Jim

Dan Hintz
07-15-2011, 11:21 AM
I wouldn't mind some...

Neil Pabia
07-15-2011, 12:36 PM
I'll give it a try and opt in. Thanks

Roger Myers
07-15-2011, 12:40 PM
Please count me in

shawn zumbrum
07-15-2011, 1:18 PM
add me please

Glen Monaghan
07-15-2011, 2:49 PM
Please enter me, russian birch would be first choice but the mdf is fine too!

Bruce Dillingham
07-15-2011, 3:49 PM
Please include me. Thanks

kevin nee
07-16-2011, 7:08 AM
Please count me in

Tim Bateson
07-16-2011, 9:32 AM
Yes, please Opt me in. - MDF

Christopher Kanda
07-16-2011, 11:27 AM
i could use this

ron hossack
07-16-2011, 1:41 PM
Please count me in ... thx

Tim Baude
07-16-2011, 2:26 PM
Sounds great....I'm in!!!!
Tim

jack Halley
07-16-2011, 8:04 PM
opting in thanks Michael Kowalczyk!

Patrick Licata
07-16-2011, 8:12 PM
Please count me in! MDF 1st
Thanks

David Reed
07-17-2011, 1:07 AM
Please add me to the list for the birch ply. thanks

Bill Clark De
07-17-2011, 5:58 AM
both hand up ..thank you

Ken Shea
07-17-2011, 10:28 AM
Opt in for either.

Thanks

Lori Kleinberg
07-17-2011, 11:38 AM
Thank you Michael and please count me in.

Cindy Rhoades
07-17-2011, 12:11 PM
opt in for either

Curt Stallings
07-17-2011, 1:52 PM
Count me in, Thanks

Ron Chapellaz
07-17-2011, 2:09 PM
I'd go for the MDF but either will do!

Bill Cunningham
07-17-2011, 8:46 PM
Opt me in..

Dave Gaul
07-18-2011, 8:58 AM
I would like in for both please!

Gary and Jessica Houghton
07-18-2011, 10:38 AM
PLease opt me in. My first choice would be maple.

Linda Tetreault
07-18-2011, 11:27 AM
Baltic Birch is my choice, Thanks.

Ernie DeMartino
07-18-2011, 6:12 PM
Either for me.

Thanks

nancy barry
07-19-2011, 9:36 AM
opt in for either.. thanks,

phil harold
07-19-2011, 10:14 AM
count me in too
thanks!

Will Winder
07-19-2011, 10:24 AM
opt-in for either, thanks.

Kevin Gregoire
07-19-2011, 12:02 PM
count me in please for either batch. thanks

Kevin W Johnson
07-19-2011, 3:23 PM
Count me in too. Thanks.

Donald Henshaw
07-20-2011, 9:49 AM
Hi, please count me in for either or both, as I could sure use them.

Thanks, Don

Bob Reda
07-20-2011, 5:33 PM
add me to the list also, either

Justin J. Hoffmann
07-20-2011, 9:41 PM
Please count me in, thanks.

dan carter
07-20-2011, 11:12 PM
Count me in.

Doug W Swanson
07-21-2011, 12:00 AM
Count me in for either one!

Greg Labacz
07-21-2011, 10:23 AM
Please opt me in

Cary Fleming
07-21-2011, 11:42 AM
I'm in for either! Michael always supplies great material.

Joseph Szegda
07-21-2011, 7:15 PM
Count me in
thank you

Steve McKee
07-21-2011, 9:42 PM
Count me in, no preference. Thanks

Floyd Cox
07-22-2011, 6:30 AM
Count me in for either one, would like to try something different on my Scroll Saw.. Thanks

Ed Maloney
07-22-2011, 3:17 PM
Me, me, me too! Thanks Mike.

Robert Alexander
07-22-2011, 6:28 PM
I'm in and ether one would be fine. Thanks

Shane Sura
07-23-2011, 9:51 AM
Opt in for either...thanks!

George M. Perzel
07-23-2011, 11:55 AM
Hi Mike
Opt me in for the mdf-looks great! Thanks
Best Regards,
George
Laserarts

Al Stramiello
07-23-2011, 3:48 PM
Thanks for doing this! Birch for me if I'm lucky.

Randy Buck
07-24-2011, 11:53 AM
Please count me in!

Thanks for the offer!

Mike Peace
07-24-2011, 6:00 PM
Please count me in!

Thanks.

Stephen Smith Sr
07-25-2011, 2:35 PM
Please count me in and thank you (either is great!)

Larry Folk
07-25-2011, 2:41 PM
Please count me in

richard poitras
07-25-2011, 10:56 PM
Count in please, either will be fine with me.

Thanks Richard

David Warkentin
07-26-2011, 10:12 PM
Opt in and thanks

Paul Brinkmeyer
07-27-2011, 4:35 PM
I'll opt in , and thanks.
Your wood is great.

Anthony Welch
07-27-2011, 9:28 PM
I'm opting in for either.

Thanks!

Trent Shirley
07-28-2011, 11:23 AM
Count me in also. Either would be great but first preference to the Russian Birch.

James Combs
07-28-2011, 2:39 PM
Count me in. What ever is available is fine with me.

Gail LaPorte
07-29-2011, 2:01 PM
Add me please

Joseph Szegda
07-30-2011, 7:42 PM
Count me in
Thank you

David T gray
07-31-2011, 12:15 AM
add me thanks

Michael Kowalczyk
08-01-2011, 12:28 PM
Congratulations to Anthony and John !!!!!!!

Please pm me your ship to address and is it a residential or commercial address. Please show us what you make with them.

Thanks to all who participated but didn't win this time. Maybe next time it will be your turn but you can still PM me if you would like to order some.

Thanks again and ...

Michael Kowalczyk
08-02-2011, 1:25 PM
Hey Anthony and John,
Remember ****1st winner to respond with ship to info gets choice of which one they get.****

Tick tock, Tick tock, Tick tock,

Michael Kowalczyk
08-05-2011, 12:01 PM
Hey Anthony and John,
Remember ****1st winner to respond with ship to info gets choice of which one they get.****

Tick tock, Tick tock, Tick tock,
Still waiting for you guys to reply with your ship to address.

Kevin Gregoire
08-05-2011, 12:04 PM
if they dont respond i will be more then happy to send you my address! :p