Mike Kelsey
07-11-2011, 10:52 PM
I'm in the process of putting this miter sled together. When I adjust the miter slot bar for no slack movement - how far out should I be able to slide the bar with no sideways movement? There are five expansion (white discs) & 5 non-expansion (black discs) which is the recommended combination for my Jet Xacta. When I pull the bar back to where there are two sets of discs only in the miter slot I always get sideways movement, not much but some. How far back should the sled be able to slide without movement? Or should I just adjust for no sideways movement with all expansion discs in the miter slot and call it good?