Bosch saber saw blades NICE!

[Don Carkhuff]

I recently bought a Bosch blade called Progressor and/or "Clean for Wood" at Home Depot. The results were incrediblly nice! The teeth are kinda perpendicular to the blade shaft. I was cutting cherry. No burns on tight turns and the finish was nearly as good as scroll saw blades. I only had to touch up with 180 grit. The top and bottom surfaces were chip free.
You can see a pic and info at:
http://www.boschtools.com
Use their search and type in saber blades.
Enjoy,
Don

[Dave Sweeney]

They are great blades aren't they? I've used all three styles and been very satisfied with them all. They tend to be a tad pricy compared to other jigsaw blades but in my experience they also stay sharp longer so the price difference is really not a factor.

[Steven Wilson]

I like to use them for rough work. For fine cutting I use Lennox 350s's on my Bosch jigsaw

[Jeff Sudmeier]

I love them as well. I have a cordless Bosch Jigsaw and use the bosch blades in it.

[Kent Cori]

I like 'em too. They work great in any compatable jig saw.