View Full Version : Live Center Question
Wes Henson
07-02-2011, 5:22 PM
Does anyone know if the threads on the nose fo the Oneway and Jet Live centers are the same? I have a Jet 1642 and the live center that came with it looks similar to the Oneway.
Thanks
Wes
Steve Schlumpf
07-02-2011, 6:56 PM
Wes - I picked up the Oneway Live Center at the symposium to replace my fairly worn-out Jet center. Just went down to the shop and removed the nose cone from the Jet and also the Oneway - they both interchange with no problem. So... I am guessing that they are the same threads.
Jeff Nicol
07-02-2011, 7:21 PM
Wes, I think most all that are made for the American market are 3/4" 16 threads, if you look at some of the supply houses you will see different nose cones that you can buy for different applications.
Jeff
Doug Wolf
07-02-2011, 8:09 PM
Jeff, They are 3/4" x 10 tpi. Or coarse threads, not 3/4" x 16" which are fine threads.
Wes Henson
07-03-2011, 12:50 PM
Thanks guys!
I looked all over the internet and they didn't have the info there.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.