Andy Maldoror
06-20-2011, 6:43 PM
the face of my wonder fence is not flat. it seems slightly convex vertically on my outfeed side. with the straightedge flat against the top and middle of the fence there is .0015" space at the bottom.
is this a common problem folks have had? does this seem like too much to you folks?
i've been trying to joint boards and thought i had finally gotten everything shimmed square, but the boards are still coming out not perfectly square....cupping up when clamping boards edge to edge.
andy
is this a common problem folks have had? does this seem like too much to you folks?
i've been trying to joint boards and thought i had finally gotten everything shimmed square, but the boards are still coming out not perfectly square....cupping up when clamping boards edge to edge.
andy