View Full Version : WIP - Curved Box Lid Handles
Peter Harbin
06-18-2011, 10:14 PM
I was able to steal a little time out in the shop to work on these lids for the Birdseye Maple boxes.
A much lengthier write-up with plenty of pictures is over at the blog. (See link in my profile.)
Pete
Peter Harbin
06-20-2011, 4:33 PM
I've still got some sanding and touch-up to do before finishing, but here is the completed first box.
Bobby O'Neal
06-26-2011, 7:07 PM
Very cool design.
Peter Harbin
06-27-2011, 3:13 AM
Thanks Bobby!
Both boxes are finally done. Just in time to pack up the shop for our move! :rolleyes: Shop time could be scarce for a while.
Lots of construction details are over at the blog (link in my profile) with copious pictures.
David Cramer
06-27-2011, 1:32 PM
I dig'em too, both of them! Very nice:)
David
Gordon Eyre
06-27-2011, 10:56 PM
Very unique tops on those well built boxes. Well done.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.