Maple Plates

[Dale Bright]

Here are 2 maple plates from the same log as the last hollow form. These are from the quarter sawn parts left after removing the pith. The finish is walnut oil. We will be using these in the kitchen.

Thanks for looking and comments are welcome.

Dale

[Roger Chandler]

Those are fine, Dale! Very nice form you put on those, any chance of a picture of the bottoms of the plates?

[John Keeton]

Well done, and functional, too! Nice wood, Dale.

[Dale Bright]

Here you go Roger, a picture of the back.

Dale

[Jim Burr]

Well done Dale! Not as easy as you make them look!

[Steve Schlumpf]

Nice bowls Dale! Pretty wood and there looks like you have a little ambrosia markings in there are well!

[Bernie Weishapl]

Nice platters Dale. Really well done.

[Thomas Canfield]

Nice looking plates Dale. The pith slab that some throw away really has some nice wood for saucers and small plates. What are the diameters of these?

[Dale Bright]

Thanks for all of the nice comments.

Thomas, the one with the most ambrosia figure is 11.5" and the other one is 10.5".

Dale

[Michelle Rich]

pretty, very pretty

[Donny Lawson]

Great job on the plates.You do good work. The Ambrosia plate would be mine.