James Carmichael
06-15-2011, 9:56 AM
I had been planning to upgrade anyway when the original broke.
I pulled everything off the top casting. Now how do I get the scew out of the tension assembly? I'm concerned the scew threads are stripped as the
Assebly is
Slipping when tensioning, but hoping the new spring will fix it.
I also discovered the tension screw is drilling a nice hole in the upper casting. My next saw will definitely be steel-spined.
Thanks!
I pulled everything off the top casting. Now how do I get the scew out of the tension assembly? I'm concerned the scew threads are stripped as the
Assebly is
Slipping when tensioning, but hoping the new spring will fix it.
I also discovered the tension screw is drilling a nice hole in the upper casting. My next saw will definitely be steel-spined.
Thanks!