View Full Version : What's in this box? *Hidden* gloat (pics)
Christian Aufreiter
02-09-2005, 8:38 AM
Yesterday I bought a nice box ...
http://home.eduhi.at/user/holzwerkstatt/index.htm/pictures.htm/EinkaufFein/Uebers~1.jpg
... and when I opened it I found another box that was even nicer ...
http://home.eduhi.at/user/holzwerkstatt/index.htm/pictures.htm/EinkaufFein/Fein-S~2.jpg
but not as nice as the "thing" I finally found:
http://home.eduhi.at/user/holzwerkstatt/index.htm/pictures.htm/EinkaufFein/fein1.jpg
It's a fine ;) FEIN ASkeu 636 Kinetik (http://www.feinus.com/p/NEWdrills/newaskeu.htm) corded drill :) :) .
Regards,
Christian
Doug Shepard
02-09-2005, 8:42 AM
That's a fine Fein find you got there.
Bob Hovde
02-09-2005, 8:42 AM
Fein is fine. :) - but what's all the other stuff spread out on the table?
Bob
Christian Aufreiter
02-09-2005, 8:51 AM
The other stuff is nothing really special, just a few casters for a toolbox I'm going to build, ladder hooks, a rubber drum and sandpaper which I plan to use for sanding edges by using the drill press.
http://home.eduhi.at/user/holzwerkstatt/index.htm/pictures.htm/EinkaufFein/Einkau~2.jpg
Matthew Dworman
02-09-2005, 8:51 AM
Aussgezeichnett!
Jeff Sudmeier
02-09-2005, 9:39 AM
And here I was thinking a Jigsaw... Neat way to gloat :)
Frank Pellow
02-09-2005, 10:41 AM
Congratulations Christian! I guess that not all your tools have a systaner.
Christian Aufreiter
02-09-2005, 2:42 PM
Congratulations Christian! I guess that not all your tools have a systaner.
Thanks, Frank.
I would have bought the Fein in a Systainer if it had been available. But Fein doesn't offer any Systainers. That's why I decided to build a "nice parking spot" for the Fein drill in my toolbox.
Regards,
Christian
Tyler Howell
02-09-2005, 7:03 PM
Congrats Christian,
Is that Fine Fein a hammer drill:confused: Just looking at the construction
Christian Aufreiter
02-09-2005, 7:15 PM
Congrats Christian,
Is that Fine Fein a hammer drill:confused: Just looking at the construction
No, we already have two hammer and one rotary hammer drill(s) and I wanted a light drill, especially for predrilling screw holes. That's why I opted for the Fein. Ergonomics are excellent and you can't beat that smooth trigger :) .
Regards,
Christian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.