PDA

View Full Version : i was asked to show a keychain demo engrave and cut



stan kern
05-26-2011, 5:39 PM
http://www.youtube.com/watch?v=RVSU299Rg9c laser cut keychain

right from selecting or design it yourself i sized the design and programmed the engrave and final cut,
this can be done in one step but i prefer 2 steps ,job took about 4-5 min ,programming and design might be
longer for the initial one
Just a small reminder when you download the file to the laser double check all paramaters were loaded and
then a final check you will see the file name on the machine display

http://www.youtube.com/watch?v=BDuEHf8nWcc arborite key chain
the arborite keychain was similar to the acylic one just slightly different material
the laser burns off the white leaving the brown background

Bren Kano
05-26-2011, 9:16 PM
Nice work. Arborite material looks great.

stan kern
05-27-2011, 9:39 PM
the laser is amazing ,just about any material will work i have even done paper

Scott Shepherd
05-28-2011, 8:41 AM
Stan, for future reference, you can put those youtube clips right in here. Just click on the "insert video" icon and you're set, so it'll look like this :


http://www.youtube.com/watch?v=BDuEHf8nWcc