stan kern
05-26-2011, 5:39 PM
http://www.youtube.com/watch?v=RVSU299Rg9c laser cut keychain
right from selecting or design it yourself i sized the design and programmed the engrave and final cut,
this can be done in one step but i prefer 2 steps ,job took about 4-5 min ,programming and design might be
longer for the initial one
Just a small reminder when you download the file to the laser double check all paramaters were loaded and
then a final check you will see the file name on the machine display
http://www.youtube.com/watch?v=BDuEHf8nWcc arborite key chain
the arborite keychain was similar to the acylic one just slightly different material
the laser burns off the white leaving the brown background
right from selecting or design it yourself i sized the design and programmed the engrave and final cut,
this can be done in one step but i prefer 2 steps ,job took about 4-5 min ,programming and design might be
longer for the initial one
Just a small reminder when you download the file to the laser double check all paramaters were loaded and
then a final check you will see the file name on the machine display
http://www.youtube.com/watch?v=BDuEHf8nWcc arborite key chain
the arborite keychain was similar to the acylic one just slightly different material
the laser burns off the white leaving the brown background