View Full Version : Masonic Lodge member help

bryan henderson
05-13-2011, 10:06 AM
Good morning all

i am donating my time(laser engraving) for a golf tourney our lodge is holding. We are supplying glasses to every golfer and I would like to engrave this file attached onto each glass. The version of coreldraw I am using is X4. I am having some issue defining the logo to a sharper view. Can someone help me out or give me the steps of how to define jpeg or digital pictures into corel draw to get smoother outlines.

Bryan Henderson


Jeff Belany
05-13-2011, 10:19 AM
Don't know if it has to be exact. Found this on Google images. There are several there.

Jeff in northern Wisconsin

Martin Boekers
05-13-2011, 10:36 AM
The file is 6x8 are these big glasses?

The only reason I ask is glass usually doesn't hold much detail as it actually fractures the glass
so what you have may be fine at a smaller size. I always do some testing on scrap window glass
if I have any doubts.

Frank Corker
05-13-2011, 10:45 AM
There are shedloads of Masonic artwork available on a simple google images search or even a google search. I've added a few for you to get going with. They are traced already and resizeable.