Keith E Byrd
05-07-2011, 10:09 PM
I started turning some of the walnut I picked up the other day. I really don't want this to check or crack. I had to stop before it is finished so: I put it in a plasic bag with shavings and sealed the bag shut. Don't know if I will get to work on it tomorrow (mother's day and LOML wants attention!) Will the bowl be ok?
After turning I had a ton of rust on my lathe - I steel wooled it and put paste was on. Is there something else i cna put on so I don't have to do that everytime I turn?
The bowl will be about 15 inches wide - when I finish roughing it out is it best to soak walnut in DNA or anchor seal? The bowl is too big for any container I have- suggestions?
Thanks in advance!
After turning I had a ton of rust on my lathe - I steel wooled it and put paste was on. Is there something else i cna put on so I don't have to do that everytime I turn?
The bowl will be about 15 inches wide - when I finish roughing it out is it best to soak walnut in DNA or anchor seal? The bowl is too big for any container I have- suggestions?
Thanks in advance!