Steve Wargo
02-04-2005, 12:51 PM
I normally post on the galoot side of the creek, but I posted a question about carbide tipped bandsaw blades last week. Your responses were very helpful, and the 3/4" Tri Master came yesterday from Louis at Iturra. I'm in absolute shock as to the quality of the cut. I've used everything from Starrett, to Timberwolf to Jet to Woodslicers and there is nothing that even closely compares to the finish from this blade. I was happy when after resawing an 8" wide piece of walnut I only had about 7 or 8 passes with the finish smoother to make call the board perfect. I can't thank you all enough, and keep up the good work. Myself and my Laguna thank you.