Thank you power tools guys.

[Steve Wargo]

I normally post on the galoot side of the creek, but I posted a question about carbide tipped bandsaw blades last week. Your responses were very helpful, and the 3/4" Tri Master came yesterday from Louis at Iturra. I'm in absolute shock as to the quality of the cut. I've used everything from Starrett, to Timberwolf to Jet to Woodslicers and there is nothing that even closely compares to the finish from this blade. I was happy when after resawing an 8" wide piece of walnut I only had about 7 or 8 passes with the finish smoother to make call the board perfect. I can't thank you all enough, and keep up the good work. Myself and my Laguna thank you.

[Mark Singer]

Steve,

I told you we knew our sh%$:rolleyes:

[Jim Becker]

And the best part is that that blade will keep on cutting like that for a VERY long time! (Suggest you store it off the saw when you are not using it for a few days to reduce fatigue and extend the life to the maximum amount)

[Steve Wargo]

Mark,

How could I every have doubted you

Jim,

I use it about every day so it will stay on unles I'm cutting tight radii. Thanks again guys.