Joe Kieve
05-03-2011, 8:36 AM
I'm almost out of the gear oil that Rockwell provides with their 503 belt sander. I'm not talking about the heavier grease for the chain but the lighter weight for the gear box. Short of ordering more from them (it's expensive), did I read somewhere that 90 wt. non-detergent gear oil is ok to use in this sander? It's a great machine and I don't want to ruin it.
Thanks for your suggestions/replies.
Joe
I did a little searching after posting this and found out @support.dewalt.com that the 90 weight is what they recommend for this sander.
Thanks for your suggestions/replies.
Joe
I did a little searching after posting this and found out @support.dewalt.com that the 90 weight is what they recommend for this sander.