Michael Ginsberg
04-11-2011, 3:50 PM
GOT THE ANSWER!! I got my email back from Kel McNaughten... He says "
Hi Michael,
Thanks for choosing a Kelton Product. Sorry about the confusion. Yes the blades are held in the handle by the 2 side set screws. The 3rd tapped hole is there so that when we release anther product to go with the system turners will be able to retro fit it without having to get another hole drilled and tapped into the handle. Hope that this helps. If there is anything else please let me know.
Regards,
Kel McNaughton.
Hi Michael,
Thanks for choosing a Kelton Product. Sorry about the confusion. Yes the blades are held in the handle by the 2 side set screws. The 3rd tapped hole is there so that when we release anther product to go with the system turners will be able to retro fit it without having to get another hole drilled and tapped into the handle. Hope that this helps. If there is anything else please let me know.
Regards,
Kel McNaughton.