Ernest Kerr
04-10-2011, 11:24 AM
190955190954Thought I would share a recent project. This medallion was cut from 1/8" masonite. The letters were glued onto a masonite sheet with the rastered background pattern, then glued to 1/2" MDF disk. The worm was sculpted from clay. I will make a silicone mold and cast in urethane resin with a bronze powder and finish to look as if cast in bronze. The customer will affix these to his wood, elevated, garden planters -- gives them a stinger bling. 45W Helix.
The disk is 10" dia.
http://www.sawmillcreek.org/images/misc/pencil.png
The disk is 10" dia.
http://www.sawmillcreek.org/images/misc/pencil.png