G3 Jaws in Package Deal?

[Mike Turner]

http://www.woodturnersresource.com/yabb2files/Templates/Forum/woody/xx.gif (http://www.woodturnersresource.com/cgi-bin/yabb2/YaBB.pl?num=1302346215/0#0) G3 Jaws!
Today at 03:50:15
http://www.woodturnersresource.com/yabb2files/Buttons/English/alert.png (http://www.woodturnersresource.com/cgi-bin/yabb2/YaBB.pl?action=modalert&num=1302346215&title=PostReply&quote=0) http://www.woodturnersresource.com/yabb2files/Buttons/English/quote.png (http://www.woodturnersresource.com/cgi-bin/yabb2/YaBB.pl?action=post&num=1302346215&virboard=&quote=0&title=PostReply) http://www.woodturnersresource.com/yabb2files/Buttons/English/modify.png (http://www.woodturnersresource.com/cgi-bin/yabb2/YaBB.pl?board=Tools&action=modify&message=0&thread=1302346215) http://www.woodturnersresource.com/yabb2files/Buttons/English/delete.png
In the G3 package I sort of am unsure or want to make sure exactly the size of the jaws in the package deal offered by Woodcraft last Nov so I dont order something wrong in the future..In the package were a small cole jaw set and a 1" and 2" set..
I turn flutes and start with a 1 1/2" square blank and want to order a set with more depth to them so to get a good grip on the blank...Thanks for all suggestions!

[John Keeton]

The jaws are normally labeled to the minimum expansion size. In other words, the 50mm jaws (2") will fit a 2" recess in expansion mode, and expand from there to their maximum size. You should have received a manual of all the jaws from which you can choose the best for your purpose, but it is available online here (http://www.teknatool.com/products/chuck_accessories/General/downloads/Accessory%20Jaw%20Manual_Nov07.pdf). Seems like the spigot jaws would work well for you.