Unisaw questions

[Bart Leetch]

I called Delta with the only numbers I can find on my Unisaw. The told me that it was manufactured in September of 1953 but that they needed more numbers to be able to direct me to the proper owners manual.

I can't seem to find any more numbers.

All I really need is to order a new knob for the louvered clean out door on the front & the threaded knob for the tilt control.

Yes I would like to get a manual or at least a copy of a manual.

Any Ideas or help would really be appreciated.

Other that that I'm all smiles with this saw. :D :D :D

TIA, Bart

[Byron Trantham]

Bart, maybe you could send them a picture of the ailing knobs. If you have a digital camera, attach them to an email. This won't get a manual but if they see the knobs maybe THEY can pinpoint the saw and get the manual as well.

[Ronald Anderson]

Hi Bart,

You can get most of the Unisaw parts that you need at one of these two places....

http://www.sawcenter.com/unisawparts.htm

http://www.acetoolrepair.com/DeltaHtml/Tables/DeltaIndex.htm

I bought the tilt mechanism locking knob for my 1948 Unisaw at the sawcenter and the service from there was prompt.

Good Luck,

Ron