Igor Petrenko
03-30-2011, 11:40 PM
Made it last year. Perfect hight for me to use keyboard on top (Regular writing desks are too high and I hate keyboard rollout trays)
Cheap accuride slides sniped off ebay.
Dovetails cut with HF dovetail jig :)
Shellac+wipe on poly. Some crazy grain on drawer fronts!
Table top has "rock hard" finish - was very hard to apply due to dog hear everywhere and took too much time to polish to glass like surface. Started with 400 sand paper and finished with auto polish paste. Grain was sealed with lots of shellac scraped out. Ended up being very practical - no scratches or dings yet and no marks from spills after almost a year of heavy usage.
189176189171189177189175189174189173189172189170
http://www.sawmillcreek.org/images/misc/pencil.png
Cheap accuride slides sniped off ebay.
Dovetails cut with HF dovetail jig :)
Shellac+wipe on poly. Some crazy grain on drawer fronts!
Table top has "rock hard" finish - was very hard to apply due to dog hear everywhere and took too much time to polish to glass like surface. Started with 400 sand paper and finished with auto polish paste. Grain was sealed with lots of shellac scraped out. Ended up being very practical - no scratches or dings yet and no marks from spills after almost a year of heavy usage.
189176189171189177189175189174189173189172189170
http://www.sawmillcreek.org/images/misc/pencil.png