Bob Smalser
01-26-2005, 9:24 PM
Previous:
http://www.sawmillcreek.org/showthread.php?t=15032&highlight=pipe+rudder
http://www.sawmillcreek.org/showthread.php?t=15910&highlight=pipe+rudder
http://www.sawmillcreek.org/showthread.php?t=15945
Rudder blade shaped, sanded...
http://pic3.picturetrail.com/VOL12/1104763/6035832/82554714.jpg
…and strengthened with 4oz fiberglass cloth set in epoxy:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82554788.jpg
Mahogany tiller yoke laminated using the laminated rudder thwart as a form:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82385088.jpg
Tiller yoke laid out and mounting hardware installed:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734141.jpg
Through hole in hull for rudder shaft bored oversize, filled with epoxy, and rebored for an epoxy-sealed hole:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82825179.jpg
Rudder thwart aligned with layout lines and hardware mortises scribed:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734078.jpg
Rudder thwart fitted with and rudder shaft inserted from bottom and aligned plumb to scribe thwart hole:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734076.jpg
Preliminary hole bored in rudder thwart:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734071.jpg
Continued…
http://www.sawmillcreek.org/showthread.php?t=15032&highlight=pipe+rudder
http://www.sawmillcreek.org/showthread.php?t=15910&highlight=pipe+rudder
http://www.sawmillcreek.org/showthread.php?t=15945
Rudder blade shaped, sanded...
http://pic3.picturetrail.com/VOL12/1104763/6035832/82554714.jpg
…and strengthened with 4oz fiberglass cloth set in epoxy:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82554788.jpg
Mahogany tiller yoke laminated using the laminated rudder thwart as a form:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82385088.jpg
Tiller yoke laid out and mounting hardware installed:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734141.jpg
Through hole in hull for rudder shaft bored oversize, filled with epoxy, and rebored for an epoxy-sealed hole:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82825179.jpg
Rudder thwart aligned with layout lines and hardware mortises scribed:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734078.jpg
Rudder thwart fitted with and rudder shaft inserted from bottom and aligned plumb to scribe thwart hole:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734076.jpg
Preliminary hole bored in rudder thwart:
http://pic3.picturetrail.com/VOL12/1104763/6035832/82734071.jpg
Continued…