thin acrylic sheets

[rich shepard]

Hi all i need some acrylic sheets for a project and can't find what I need.
Need some Yellow sheets either .01 or .015 thick, or something close any ideas.
Clear would work but then would need to paint it.
thanks
rich

[Joe Pelonio]

McMaster-Carr has .06, I have gotten thinner but it was several years ago and I can't remember where from.

[Richard Rumancik]

Rich, you might ask Rowmark if they have any ideas. They do laminations of materials and some of their products use .010" cap layer. Not sure if you can get yellow or not but doesn't hurt to ask. They will sell caps and cores but they are not shown as catalog items.

[Scott Challoner]

You can buy the Rowmark ADA Alternative material from Johnson Plastics. That is just a single color of impact modified acrylic. The have it in 1/32, 1/16, and 1/8".

[Larry Bratton]

Hi all i need some acrylic sheets for a project and can't find what I need.
Need some Yellow sheets either .01 or .015 thick, or something close any ideas.
Clear would work but then would need to paint it.
thanks
rich
Rowmark Laser Lights are .004 with a .001 cap. They have yellow. If the .004 is too thick you might approach them about some of the cap.
http://www.rowmark.com/laser/Laserlights/laserlights.asp
That's almost as thin as sign vinyl which is like 2.5 mils

[rich shepard]

Thanks will check it all out. The Rowmark would work but need a soild Yellow and then I have to paint red stripes on it for some parts I need to cut.
thanks
rich