James Vogts
03-10-2011, 10:03 PM
As the title says, I need to replace the bearings on the cutter head of my grizzly jointer. The bearing closest to the pulley is the one that is going bad, but I figured that I would replace both of them.
I can't get the pulley off of the end of the cutterhead, and I don't know how to get the bearing off of the end of the cutterhead. I've got the bearing housing off of the end of the cutterhead opposite from the pulley. Hopefully I don't need press the new bearings on...
Here is the link to the part's list.
http://cdn5.grizzly.com/partslists/g1182_pl.pdf
I can't get the pulley off of the end of the cutterhead, and I don't know how to get the bearing off of the end of the cutterhead. I've got the bearing housing off of the end of the cutterhead opposite from the pulley. Hopefully I don't need press the new bearings on...
Here is the link to the part's list.
http://cdn5.grizzly.com/partslists/g1182_pl.pdf