DC for the Kreg Jig

[Charles McKinley]

Hi All,

I have made a simple bracket to collect the chips from the bench mounted Kreg Jig. I made it from a piece of scrap 7 1/4 X 4 with a 3/4 inch dip to help hold the vac hose. The hose is held by a wire that is attached by a hole drilled through the board and wrapped around a screw on the other side.

The drill is an old B&D industrial that rarely leaves the kreg bench.

Feel free to ask questions.

[Jeff Sudmeier]

I like it, simple yet does the job. Best of all, you used the kreg to make it!

[Charles McKinley]

I like it, simple yet does the job. Best of all, you used the kreg to make it!

Thanks Jeff,

Is there another way to join wood? ;)

[Byron Trantham]

Charles,
Great solution. I will doing something similar if I get that big job and have to drill 650 pocket holes! :rolleyes: