Charles McKinley
01-23-2005, 10:49 PM
Hi All,
I have made a simple bracket to collect the chips from the bench mounted Kreg Jig. I made it from a piece of scrap 7 1/4 X 4 with a 3/4 inch dip to help hold the vac hose. The hose is held by a wire that is attached by a hole drilled through the board and wrapped around a screw on the other side.
The drill is an old B&D industrial that rarely leaves the kreg bench.
Feel free to ask questions.
I have made a simple bracket to collect the chips from the bench mounted Kreg Jig. I made it from a piece of scrap 7 1/4 X 4 with a 3/4 inch dip to help hold the vac hose. The hose is held by a wire that is attached by a hole drilled through the board and wrapped around a screw on the other side.
The drill is an old B&D industrial that rarely leaves the kreg bench.
Feel free to ask questions.