what is the smallest over hang face frame hinge?

[keith ouellette]

I meant to make the doors hang over the face frame by 1/2" but I did not read my own instructions carefully enough and now I only have enough door width for 1/4" overlay.

I have not assembled the doors yet and can just make larger rails and stiles If I need to but would rather not.

Is there a 1/4" overlay hinge?

[Tom Ewell]

I presume that your talking about euro style hinges on face frame.

Couldn't find 1/4" but Blum makes a compact 3/8" overlay. Might be able to tweak the cup hole a little closer to the edge of the door to approach your 1/4". If you drill your hole closer to the edge just be careful and consider the effect on the edge profile you cut on the face side of your doors.
http://wwhardware.com/catalog.cfm?GroupID=Cabinet%20Hinges&CatID=Cabinet%20Hinges%2C%20Blum%26%23174%3B%20Con cealed&SubCatID=105%26%230176%3B%20Compact%2038

[Paul Murphy]

Yes, Amerock (and others).

http://www.rockler.com/product.cfm?page=5830

[scott vroom]

Blum series 33 compact/concealed FF hinges come in 1/4" overlay.

[Steve Griffin]

Blum crank arm (71t5650) with zero plate and bored properly will do it.

(Or straight arm and 9mm plate).

-Steve

[Tom Ewell]

Blum series 33 compact/concealed FF hinges come in 1/4" overlay.
:o ..Duh, guess I didn't look well enough, they're right there in the same catalogue.

Good catch, sure make things a lot simpler.

[Karl Brogger]

Blum crank arm (71t5650) with zero plate and bored properly will do it.

(Or straight arm and 9mm plate).

-Steve

I'd do the straight arm and the 9mm plate.

How about you just remake the doors?