Hussain ZAKARIYA . Kuwait
03-07-2011, 2:03 PM
hello every one
first i appologize for my english , it`s not very well . i just try to paint an acrylic with non tradotional paint ( spray ) , i tried a Poweder coating paint and it`s gave me a very good result !! i surprised !! for the test i only bought 1 color ( red )
lets talk about the steps :
1- I engraved the logo with little deep engraving( only the space wich i want to paint it ).
2- I put the powder paint on the engraved area and make it equal by my hand.
3- i engraved again with low power (10) and high speed (100).
4- then i removed the extra powder from other space area by my hand and you can use i handy vacum .
5- then i engraved the rest of the logo ( i hoped that i have a yellow color :( ).
6- remove the item and wash it
let see the sample
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188361_115418431868554_100002011947849_116451_1804 823_n.jpg
first i appologize for my english , it`s not very well . i just try to paint an acrylic with non tradotional paint ( spray ) , i tried a Poweder coating paint and it`s gave me a very good result !! i surprised !! for the test i only bought 1 color ( red )
lets talk about the steps :
1- I engraved the logo with little deep engraving( only the space wich i want to paint it ).
2- I put the powder paint on the engraved area and make it equal by my hand.
3- i engraved again with low power (10) and high speed (100).
4- then i removed the extra powder from other space area by my hand and you can use i handy vacum .
5- then i engraved the rest of the logo ( i hoped that i have a yellow color :( ).
6- remove the item and wash it
let see the sample
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188361_115418431868554_100002011947849_116451_1804 823_n.jpg